Tork Craft | Polishing Bonnet Wool 7" 178mm Accud_Micrometer Use them to cut hardwood

Use them to cut hardwood

A typical panel would be cut to allow 5 mm between itself and the bottom of the groove in the frame

Maximum flow rate of 5000 Nl/min at 6 bar

will help to keep the work surface free of debris

Tork Craft | Polishing Bonnet Wool 7" 178mm Accud_Micrometer Use them to cut hardwood178mm Polishing Bonnet The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is the same as the backing pad's diameter. It is necessary to polish a vehicle body panel when: The panel has been newly painted with a clear coat Shallow scratch marks need to be removed The panel has