Tork Craft | Drill Bit HSS Pilot for 915 Series TCT Hole Saws Type_Abrasives and shock-absorbing rubber casing

and shock-absorbing rubber casing

Small handles are approx

Sanding stroke: 3mm

For creating notches

Tork Craft | Drill Bit HSS Pilot for 915 Series TCT Hole Saws Type_Abrasives and shock-absorbing rubber casingHSS Pilot Drill Bit for 915 Series TCT Hole Saws The drill bit is a replacement pilot drill bit for Tungsten Carbide Tipped (TCT) hole saws. Replacing the pilot drill bit Use an Allen key (TC17016) or in some cases a slot head screwdriver to undo the grub screw securing the pilot drill bit in the mandrel Replace the pilot drill bit by aligning the flat side on the shank with the grub screw Tighten the grub screw. Make sure the pilot drill bit is