Tork Craft | Plug Cutter - Various Sizes 10mm Plug Cutter:14mm The 402 mandrel is used

The 402 mandrel is used primarily with Dremel Cut-off Wheels and Polishing Wheels

Classic Face Clamps are available in two sizes: 2" reach and 3" reach

45mm Forstner Bit

table-mounted and CNC routers

Tork Craft | Plug Cutter - Various Sizes 10mm Plug Cutter:14mm The 402 mandrel is usedPlug cutter A plug cutter is used to make a timber plug to hide a drilled hole INSIDE DIAMETER: 8mm MATERIAL: Hardened steel Application: There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged The plug cutter is measured on the inside diameter Always make sure that the hole is drilled to correspond to the correct plug cutter The benefits of using plug cutters: The same wood can be used to