3 - 6.5 GPM Pressure Washer Plumbing Kit Horizontal Leg Tank or Any Water Tank PL-4-TA TRAPPED 1" FPT x 1" FPT

1" FPT x 1" FPT

210 degrees f maximum

YVB5121B 21 GPM 5100 psi multi-gun unloader 1/2" FPT in/out/bypass

Do NOT use galvanized fittings or metal ball valves between your pump and water tank because they will likely corrode and flake little chunks into your pump valves leading to vibration and/or damage

3 - 6.5 GPM Pressure Washer Plumbing Kit Horizontal Leg Tank or Any Water Tank PL-4-TA TRAPPED 1" FPT x 1" FPT3 6. 5 GPM Pressure washer plumbing kit for a horizontal leg tank (any water tank with a flat wall) with everything needed to correctly plumb the supply side of the pump from the horizontal leg tank and unloader bypass return hose. Completely remove the garden hose inlet on the bottom of the pump. There should be nothing to plug. The 1" hose barb x 1 2" mpt will install into the pump inlet. Included in the kit are as follows: 1 x 1 80 mesh Y Strainer