SCMT09T308-MF2 TM3501 Square Turning Insert Single Sided AB6357-360 66 EF 4WD 1994-1998 (Front)

66 EF 4WD 1994-1998 (Front)

Parker Suregrip SGT20 Tig Torch x 8m

Ready for use in a matter of seconds thanks to fixable

T&E sockets feature "Greater Surface Contact" on the flats of the hex (away from corners) gives a more positive non-slip

SCMT09T308-MF2 TM3501 Square Turning Insert Single Sided AB6357-360 66 EF 4WD 1994-1998 (Front)TM3501 peaks in a variety of component sizes and in difficult alloys stretching from duplex to complex, high alloyed super duplex stainless steel> MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm rev. Good capacity for medium rough machining. Indicative machining range: f = 0,100,40 mm rev, ap = 0,23,0 mm.